Motorola L2 GSM - Manual (Page 17)

15 main attractions
Note: The use of wireless devices and their accessories may
be prohibited or restricted in certain areas. Always obey the
laws and regulations on the use of these products.
turn Bluetooth power on or off
Find it: Press - > Bluetooth Link > Setup > Power > On
If Bluetooth Power is On, your phone can automatically pair with
the handsfree device you have used before. Just turn on the
device or move it near the phone.
Note: To extend battery life, use the above procedure and set
Bluetooth Power to Off when not in use. Your phone will not pair
with devices until you set Bluetooth Power back to On and pair
your phone with the devices again.
pair with a headset or handsfree device
Before you try to pair your phone with a device, make
sure your phone’s Bluetooth power is on and the device is on
and ready in pairing or bonding mode (see the user’s guide
for the device). You can pair your phone with only one device
at a time.
Find it: Press - > Bluetooth Link > Handsfree > [Look For Devices]
Your phone lists the devices it finds within range.
10 Highlight a device in the list and press the Select key.
11 If necessary, enter the device passkey (such as 0000) and
press the Ok key.