Miele DA5990W - Manual (Page 27)

a 3 protective shields
to prevent scratches to the chimney
during installation.
b 1 vent collar
for use with 6" (150 mm) exhaust
ducting
c 1 reducing collar
for use with 5" (125 mm) exhaust
ducting.
d 2 protective strips
for chimney mounting
e Upper retaining plate secures the
chimney extension
f Middle retaining plate for additional
stability of the chimney
g Lower retaining plate secures the
canopy and motor assembly.
h Installation kit for recirculation
mode; contains diverter, hose and
hose clips
(optional accessory)
1 lever for dismantling the chimney
Installation instruction diagram
8 large headed screws 5 x 40 mm
for securing the retaining plates and the
canopy
(S8 wall anchors included in the
packaging are not for use in USA)
2 M 6 locking nuts
for securing the unit
,
CAUTION
To avoid risk of hand or other injury,
avoid contact with sharp edges
during the assembly and installation
process.
Installation accessories
27