Motorola 2700 - Manual (Page 4)

portable broadcast unit manual V 1.0 4
Reporter Set Motorola 2700 portable version
technical data:
microphone in: impedance - 200 ohm
sensitivity - variable from 0,5mV – 5mV
headphone out: impedance(recommended) - 300 Ohm
volume - adjustable
amplifier capacity - 10 mW
tape in: impedance - 50 KOhm
sensitivity - variable from 100mV - 1V
power consumption: - stand by appro. 300 mA
max. 1500 mA
dimensions: length - 250 mm
breadth - 95 mm
height - 200 mm
weight: - appr. 3,6 kg (incl. battery,
bag, telephone and handset)
All audio in- and outputs are balanced and groundfree.
The seizure of the audio connectors is conform to the ARD specification no.: 3/1-8/2:
5 pol. female XLR audio connector 3 pol. female XLR audio connector
(both connectors parallel) (aux in)
Pin 1 - shield Pin 1 - shield
Pin 2 - microphone Pin 2 - LF (voice frequency signal)
Pin 3 - microphone Pin 3 - LF (voice frequency signal)
Pin 4 - headphone
Pin 5 - headphone
* NOTICE !
* The
Reporter Set operates with radio signals which might be subject to interference
* to persons and equipment.
* It is recommended to use the interface with an external antenna outside of the
* building for avoidance of interferences to other electronic equipment.