Removing the end caps for painting – MartinLogan Ticket User Manual
Page 8
Advertising
8 Removing the End Caps for Painting
Required tools (not included):
Philips head scrwedriver
1 Prepare a flat surface with a cushion and/or blanket to
protect the Ticket. Place the Ticket driver side up.
2 Using a Phillips head screwdriver remove two screws
from the bottom edge of the Ticket (see figure 11).
3 The end cap may now be safely removed (see figure 12).
NOTE: It is important that the end caps are lifted
straight up and away from the speaker body.
Repeat steps 2–3 to remove other end cap.
Advertising