Meridian America 562V.2 - Manual (Page 24)

Setting up the multimedia controller
19
Digital audio outputs
The following table gives details of the digital audio outputs:
Use this output To connect to this
MAIN DIGITAL A digital surround processor or
OUTPUT Meridian DSP loudspeakers.
TAPE DIGITAL A digital tape recorder, computer
OUTPUT sound card, or digital second-room
system.
OPTICAL TAPE OUT A digital recorder with optical input,
such as a MiniDisc recorder.
Digital connections
The digital connections should be made with high-quality 75
Ω
screened cable. Suitable cables are available from Meridian. We
do not recommend using audio cables, which do not have
adequate shielding or the correct impedance, or cables intended
for UHF applications, as these do not provide adequate
shielding in the 1–30MHz region.
Optical connections should be made using a suitable optical
fibre supplied by your dealer.
Analogue audio inputs
The following table gives details of the analogue audio inputs:
Use this output To connect to this
LP/A1, CD/A2, An analogue source such as a
RADIO/A3, TV/A4, radio tuner, tape recorder, TV
TAPE1/A5, VCR2/A6, tuner, or cable television.
VCR1/A7
Analogue audio outputs
The following table gives details of the analogue audio outputs:
Use this output To connect to this
MAIN ANALOGUE The Meridian 568 Digital Surround
Processor analogue input, to take
advantage of its 24-bit ADC precision.
TAPE OUTPUTS An analogue tape recorder or analogue
second-room system.