All dimensions in inches and millimeters – MedCenter HORN DB3 User Manual
Page 3
© MEDC 2001
06/01
GENERAL ARRANGEMENT
All cable glands should be of an equivalent NEMA/IP rating to that of the unit
and integrated with the unit such that this rating is maintained.
Once termination is complete, carefully push the cover back onto the unit, avoid-
ing damage to the mating surfaces. Tighten the 6 off cover screws evenly, to
ensure maintenance of the required gap between the cover and enclosure.
3. OPERATION
The unit is initiated directly from the power source.
For all versions, a 5-way DIL switch selects the tone required from the list shown.
The DB3P includes two 5-way DIL switches to select any two tones from the list.
These units can be switched between any two of the tones listed by either:-
· Reversing the polarity of the power supply, or
· By a 3 wire common +ve system, switching between the two –ve lines.
10
11
/
16
"
271mm
Ø 4
5
/
8
" / 117mm
Ø 6
11
/
16
" / 170mm
FIXING HOLE Ø
1
/
2
" / 13mm
FIXING HOLES
Ø ALL
11
/
32
" / 9mm (2 POS.)
2 x
1
/
2
" NPT ENTRIES MAX
7
19
/
32
"
193mm
1
3
/
16
"
30mm
1
3
/
16
"
30mm
POSITION 2 IS USED IF ONLY 1 x
1
/
2
" NPT ENTRY REQUIRED
2
3
/
32
"
53mm
ALL DIMENSIONS IN INCHES AND MILLIMETERS