Marantz SA-11S1 - Manual (Page 9)

5
ENGLISH
b SOUND MODE button
m PAUSE button
, STOP button
. PLAY button
⁄0 OPEN/CLOSE button
The buttons listed above are the same to the buttons
on the front panel of the main unit.
Please see the correspond items in “Front Panel”
section.
⁄3 TIME button
This button is used to switch from the text display to
the time display when using a text-compatible Super
Audio CD. It is also used to change the time display.
Each time that it is pressed, the displayed time cycles
from track elapsed time
→ track remaining time →
total remaining time → track elapsed time . (See page
9)
⁄4 TEXT button
This button is pressed to switch the main screen from
the time display to the text display when using a text-
compatible Super Audio CD. (See page 12)
⁄5 DISPLAY button
This button switches the display screen on and off.
The ⁄1 indicator turns on when Display Off is set.
(See page 13)
⁄6 0 - 9 (Numerical buttons)
Use these buttons to select tracks directory.
⁄7 PROG. button
This button is for program play. (See page 11)
REMOTE CONTROLLER
⁄8 , (Track skip buttons)
: When this button is pressed, the unit goes
back to the beginning of the current track. If
the button is pressed more times, the track
being played is skipped back.
: Each time this button is pressed, the track
being played is skipped forward.
* Search buttons are provided separately for the
remote control unit. Use ⁄9 Search buttons for
search function.
⁄9 , (Search buttons)
: While this button is pressed during playback,
tracks are searched backward.
: While this button is pressed during playback,
tracks are searched forward.
¤0 RECALL/SCROLL button
Use this button to scroll text while displaying text
information in a Super Audio CD disc that supports
TEXT.
This button is also used for checking the programmed
tracks during a program or when a program is
stopped. (See page 12)
¤1 CANCEL button
Use this button to cancel a programmed track. (See
page 12)
¤2 A-B (A-B Repeat button)
This button is to determine starting and ending points
for A-B repeat play. (See page 11)
¤3 RANDOM button
This button is for random play. (See page 11)
¤4 AMS (Automatic Music Scan button)
Use this button for AMS play. (See page 12)
* In this instruction manual, some operations can only be performed with the remote control. For operations that can be performed with buttons both on the
main unit and on the remote control, the button names are shown in the mark. And for operations that can only be performed with buttons on the
remote control, the button names are shown in the mark.
¤5 REPEAT button
This button is for repeat play. Each time this button is
pressed, repeat mode changes as follows. “All
Repeat”
→ “Track Repeat” → “Repeat Off” (See page
11)
¤6 MENU button and ENTER button
(Menu setup)
These buttons are used to set the time for quick
replay. (See page 12)
¤7 QUICK REPLAY (Quick replay) button
This button is used to do quick replay of the tracks.
(See page 12)
¤8 NOISE SHAPER button
This button is pressed to turn the noise shaper on
and off. (See page 10)
¤9 DC FILTER button
This button is pressed to turn the DC filter on and
off. (See page 10)
‹0 FILTER button
This button is pressed to make the digital filter
settings. Each time it is pressed, the settings cycle
from FIL1
→ FIL2 → FIL3 → FIL1. (See page 10)
‹1 DIGITAL OUT button
This button is pressed to turn the digital output for
the Audio CD signal on and off. (See page 10)
‹2 INPUT button
This button switches the input selector (INPUT) of
the Marantz PM-11S1 amplifier.
‹3 VOLUME button
This button is used to increase or decrease the
volume of the Marantz PM-11S1 amplifier.
CANCEL
A-B
SOUND
INPUT
QUICK
VOLUME
OPEN/
RECALL
NOISE
RC-11SAS1
MODE CLOSE
DISPLAY TIME TEXT
MENU SCROLL ENTER
AMP
REPLAY
AMS
PROG RANDOM
REPEAT
4
1 2 3
5 6
7 8 9
0
DIGITAL OUT
DC FILTER SHAPER FILTER
⁄3
⁄0
⁄5
¤6
‹2
m
.
⁄8
,
⁄9
¤2
¤4
¤1
⁄7
¤8
⁄6
¤9 ‹1
‹0
¤3
¤5
¤7
‹3
¤0
⁄4
b
04.8.3, 4:42 AM Page 5