Makita HR2811FT - Manual

P o w e r f u l a n d C o m f o r t a b l e O p e r a t i o n
w i t h C o m p a c t B o d y
Comparison of Drilling Efficiency
Note: Numbers in the charts below are relative values when the capacities of competitor "B" are indexed at 100. Note: Numbers in the charts below are relative values when
the capacities of competitor "H" are indexed at 100.
Test conditions: Drilled in concrete with compressive strength of 40N/mm 2 . Test conditions: Chipped concrete with compressive
strength of 40N/mm 2 , and measured
the amount of concrete removed.
Drilling
Bit diameter: 14.5mm
80 100 120 140
fast slow
Makita HR2811F
Competitor "H"
100 100
Competitor "B" 100 100
85 85
0
Bit diameter: 22mm
80 100 120 140
fast slow
Makita HR2811F
Competitor "H"
130 130
Competitor "B" 100 100
70 70
0 80 100 120 140
fast slow
Makita HR2811F
Competitor "H"
140 140
100 100
0
Chipping
Items of standard equipment and specifications may differ by country or area.
Combination Hammers HR2811F/FT, HR2810/T Rotary Hammer HR2800 325 325
Continuous rating Input
Capacity
Concrete : (with diamond core bit)
Concrete : (with T.C.T. bit)
Steel :
Wood :
Impacts per minute (ipm)
No load speed (rpm)
Dimensions
Net weight
Power supply cord
HR2811F
800W
80mm (3-1/8")
28mm (1-1/8")
13mm (1/2")
32mm (1-1/4")
0 - 4,500
0 - 1,100
320 x 89 x 225mm
(12-5/8" x 3-1/2" x 8-7/8")
3.3kg (7.3lbs)
4.0m (13.1ft)
HR2810
800W
80mm (3-1/8")
28mm (1-1/8")
13mm (1/2")
32mm (1-1/4")
0 - 4,500
0 - 1,100
314 x 89 x 225mm
(12-3/8" x 3-1/2" x 8-7/8")
3.2kg (7.1lbs)
4.0m (13.1ft)
HR2811FT
800W
80mm (3-1/8")
28mm (1-1/8")
13mm (1/2")
32mm (1-1/4")
0 - 4,500
0 - 1,100
345 x 89 x 225mm
(13-5/8" x 3-1/2" x 8-7/8")
3.4kg (7.5lbs)
4.0m (13.1ft)
HR2810T
800W
80mm (3-1/8")
28mm (1-1/8")
13mm (1/2")
32mm (1-1/4")
0 - 4,500
0 - 1,100
339 x 89 x 225mm
(13-3/8" x 3-1/2" x 8-7/8")
3.3kg (7.3lbs)
4.0m (13.1ft)
HR2800
800W
80mm (3-1/8")
28mm (1-1/8")
13mm (1/2")
32mm (1-1/4")
0 - 4,500
0 - 1,100
314 x 89 x 225mm
(12-3/8" x 3-1/2" x 8-7/8")
3.2kg (7.1lbs)
4.0m (13.1ft)
Standard Equipment Quick Change Drill Chuck (HR2811FT, HR2810T only), Depth Gauge, Side Grip (Tool does not come with bit.)
Double Insulation
Variable Speed
Reversing
Torque Limiter
Dust Collecting
SDS-Plus Shank
Carrying Case
Built-in Job Light
(HR2811F, HR2811FT only)
Quick change drill chuck (Drill chuck set)
For Model: HR2811FT, HR2810T
Part No. 194079-2
Dust cup
Dust cup set
Dust extractor attachment
Part No. 193472-7
Bit dia: 12-16mm Part No. 421664-1
Bit dia: 6-14.5mm Part No. 421342-3
Part No. 194580-7
Accessories
Note: It may differ under some conditions.
PRINTED IN JAPAN Z23326-2 2007-08 Note : Tool does not come with bit
Makita Corporation
3-11-8 Sumiyoshi-cho, Anjo, Aichi, 446-8502 Japan
Satisfy Professional's Needs
Rotary Hammer
HR2800 28mm (1-1/8")
Combination Hammers
HR2811F/FT, HR2810/T 28mm (1-1/8") SDS-Plus Shank
Photo: HR2810 Photo: HR2810
Photo: HR2811F