Connecting the unit to a tv – Memorex MCC215 User Manual
Page 32
Advertising
31
CONNECTING THE UNIT TO A TV
You can connect this unit to a TV using the supplied A/V cable. This will
allow you to view the unit’s videos and pictures on a non-high definition (non-
HD) television.
First, make sure to set the TV
SYSTEM to NTSC or PAL,
corresponding to your TV color
system as shown on page 28,
then connect as follows.
1. Power on the unit and
connect the single plug to
the unit’s TV OUT jack and
the other to the television’s
AV IN jacks.
2. Set the TV’s video input to the AV IN jack.
3. Operate the unit as described in this manual, but the information that
usually appears in the display will now appear on the TV.
Audio
White
AV-Mode
Video
Yellow
R
Advertising