Milwaukee 1-1/2" User Manual
Page 3
page 3
1.
Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord.
Contact with a “live” wire will make exposed metal parts of the tool “live” and shock the operator.
2.
Wear ear protectors when using the tool for extended periods. Prolonged exposure to high intensity noise can cause hearing loss.
3.
Keep hands away from all cutting edges and moving parts.
4.
Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a
MILWAUKEE service facility for a free
replacement.
5.
WARNING! Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause
cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
•
lead from lead-based paint
•
crystalline silica from bricks and cement and other masonry products, and
•
arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well
ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.
SPECIFIC SAFETY RULES
Specifications
Cat.
No.
5314-21
5318-21
Percussion
Core
Bits
6"
6"
Load/
No
Load
RPM
385*
385*
Percussion
Carbide
Tipped
Bits
1-1/2"
1-1/2"
Load/
No Load
Blows per
Minute
3400*
3400*
Volts
AC
Only
120
120
Self-
Drilling
Anchors
5/8"
5/8"
Chisels
See
p. 8
*
EFCC - The Electronic Feedback Control Circuit maintains constant speed under
varying load conditions.
FUNCTIONAL DESCRIPTION
1.
Stop rotation knob
(Cat. No. 5314-21 only)
2.
Handle
3.
Trigger
4.
Side Handle
4.
Dust shield
5.
Bit release collar
Amps
11
11
No Load Revolutions per
Minute (RPM)
Double Insulated
Symbology
Canadian Standards Association
Underwriters Laboratories, Inc.
Alternating Current
Amps
Cat. No. 5314-21
2
3
4
5
6
1
Mexican Approvals Marking
BPM
Blows per Minute (BPM)