Mercedes-Benz S 4300 - Manual (Page 115)

114
Controls in detail
Seats
Activating
̈ Press button 1.
The indicator lamp in the switch comes
on and the following message appears
in the multifunction display for five sec-
onds:
Deactivating
̈ Press button 1 again.
The indicator lamp in the button goes
out.
The message:
DRIV. DYN. SEAT ADJ.
DRIVER
OFF
appears in the multifunction display.
Seat heating*
Vehicles without seat ventilation*
The switch is located on the door.
1 Normal heating
2 Rapid heating
̈ Switch on ignition.
Switching on seat heating
̈ Press switch 1.
A red indicator lamp above the switch
comes on.
i
You can adjust the characteristics of
the drive-dynamic seat using the con-
trol system (
୴ page 163).
i
When the engine is turned off, the last
cushion setting retained in memory.
The cushion is automatically adjusted
to this setting when the engine is re-
started.