Philips Magnavox VRB411AT - Manual (Page 12)

12 Automatic Channel Setup
2
Press the MENU button.
SELECT op CHOOSE B
→ PROGRAM
VCR SET UP
TUNER SET UP
SET CLOCK
TO END PUSH EXIT
• You can not enter the TUNER SET
UP menu when you are in Line
Input mode (channel 001 or 002).
When you select channel 001 or
002, AV REAR or AV FRONT will
appear on the screen briefly.
• You can not program channels if
you are using a Cable Box or DBS.
• If you have an antenna, channels 2-
69 will be available. If you have a
cable connection, channels 1-125
will be available.
Helpful Hints
Although your VCR may automatically memorize the channels you
receive when you turn it on for the first time, this function lets
you set up the channels again.
3
Press the PLAY/o button or the STOP/p button to select
TUNER SET UP, then press the F.FWD/B button.
SELECT op CHOOSE B
→ AUTO PROGRAMMING
ADD/DELETE CH
CH MEMORY REVIEW
TV STEREO
ON
2ND AUDIO
TO END PUSH EXIT
4
Press the PLAY/o button or the STOP/p button to select
AUTO PROGRAMMING, then press the F.FWD/B but-
ton. The VCR distinguishes between TV channels and cable chan-
nels, and the VCR will memorize all the channels you receive.
5
Wait for a few minutes while the VCR sets up the chan-
nels. When this is complete, CHANNELS ARE SET will appear on
the screen. Then the programming of the lowest channel number
placed in the VCR’s memory will appear on the screen. Now
when you press the CH(annel) o/p button, you will scan only
through channels you receive.
2
3-4
1
Press the VCR button.
1
VOL
CH
3 2 1
6 5 4
9 8 7
0
POWER
STATUS/EXIT
MEMORY SLOW REC/OTR
SPEED TIME SEARCH
ALT. CH
PAUSE/STILL
MUTE
TV CBL/DBS VCR
F.FWD REW
PLAY
STOP
VCR/TV EJECT
MENU CLEAR
ENTER
VRB611 only
AUTO CH PROGRAMMING
IN PROCESS
PLEASE WAIT
START FINISH