Makita ML902 - Manual (Page 5)

For USA only
Recycling the Battery
Ni-Cd
The only way to dispose of a Makita battery is to recycle it. The law
prohibits any other method of disposal.
To recycle the battery:
1. Remove the battery from the tool.
2. a). Take the battery to your nearest Makita Factory Service Center
or
b). Take the battery to your nearest Makita Authorized Service Center or Distributor that has been
designated as a Makita battery recycling location.
•
Call your nearest Makita Service Center or Distributor to determine the location that provides Makita
battery recycling. See your local Yellow Pages under ‘‘Tools-Electric’’.
OPERATING INSTRUCTIONS
Charging
For ML702 (Fig. 1), ML902 (Fig. 1) and ML901 (Fig. 2)
Charge the battery cartridge with the Makita charger before use. To remove the battery cartridge, pull out the set plate
on the torch/flashlight and grasp both sides of the cartridge while withdrawing it from the torch/flashlight. After charging,
insert the battery cartridge into the torch/flashlight and snap the set plate back into place.
For ML903 (Fig. 3)
Charge the battery cartridge with the Makita charger before use. To remove the battery cartridge, withdraw it from the
torch/flashlight while pressing the buttons on both sides of the cartridge. After charging, insert the battery cartridge into
the torch/flashlight all the way until it locks in place with a little click.
NOTE:
Battery cartridge 9100, 9102, 9100A and 9102A can be used on ML903 if you install the set plate. Install the set plate
on ML903 with the screw provided as shown in Fig. 4.
The following tables indicate the charging time and operating time on a single charge.
ML702
Voltage Battery cartridge Operating time Charger
7.2 V
7000 Approx. 140 min.
DC7100, DC9710, DC9711,
DC1201, DC1411, DC1439,
DC1470, DC1422, DC1801
7002 Approx. 210 min.
DC9711, DC1201, DC1411,
DC1439, DC1422, DC1801
7033 Approx. 240 min.
DC9711, DC1411, DC1439,
DC1422, DC1801
ML901/ML903
Voltage Battery cartridge Operating time Charger
9.6 V
9100, 9100A, 9120 Approx. 160 min.
DC9710, DC9711, DC1201,
DC1411, DC1439, DC1470,
DC1422, DC1801
9102, 9102A, 9122 Approx. 230 min.
DC9711, DC1201, DC1411,
DC1439, DC1422, DC1801
9133 Approx. 260 min.
DC9711, DC1411, DC1439,
DC1422, DC1801
9134 Approx. 310 min.
9135, 9135A Approx. 360 min.
(Note)
If you use a power checking battery on Model ML901/ML903, the power checking battery will not indicate the remaining
battery capacity properly.
5