Mr. Coffee TM3 - Manual (Page 5)

Clean Your Iced Tea Pot Before First Use
1. Wash the pitcher, pitcher lid, steeping basket and steeping basket lid
with warm water and mild detergent. Rinse thoroughly. (Please refer to
the diagram of parts listed below)
WARNING: To prevent injury from hot steam, do not plug the
unit in until water is in the reservoir and the pitcher is in place.
2. Fill the pitcher with water to the top water level mark on the pitcher and
pour into the water reservoir. Do not overfill. Replace the steeping basket
and lid on top of the machine.
3. Place one tray of ice cubes into the pitcher.
4. Turn the steeping dial to the open position as illustrated in the diagram A
below.
5. Slide the pitcher with lid, spout first, under the machine. Make sure the
spout lid is open.
6. Plug the cord into the electrical outlet and depress the push button (ON)
to turn the machine on. The indicator light will illuminate to let you know
the machine is on.
7. When the water has cycled through, the machine will shut off autcmati-
cally.
8. Slide the pitcher away from the machine and discard the water.
W a t e r
Pushbutton
I n d i c a t o r
. . .
In
DIAGRAM A