Meyer XT1600L - Manual (Page 10)

MAINTENANCE INSTRUCTIONS
Tandem Trailer Page 10
Figure 2. Lubrication Diagram
L2
L1
L2
L1
XT1600 &XT1600L TRAILERS
TOP VIEW
L1
Both Sides
Both Sides
Both Sides
Both Sides
XT2200, XT2200L & XT2200XL
TRAILERS
SIDE VIEW
BEFORE SERVICING OR INSPECTING THIS TRAILER, HAVE IT HITCHED TO A
TRACTOR WITH ENGINE OFF, KEYS REMOVED AND PARKING BRAKE SET OR CHOCK ALL FOUR
WHEELS OF TRAILER.
FAILURE TO COMPLY WITH OPERATING AND MAINTENANCE INSTRUCTIONS
MAY CAUSE SERIOUS PERSONAL INJURY.
FREQUENCY ITEM LOCATION PROCEDURE
Every 2 Work
Days Or 20
Loads
Tandem Wings L2 Jack up empty trailer off ground and support
on adequate jack stands to relieve pressure
and grease until it purges.
Annually Wheel Bearings L1 Clean and pack hub bearings. Use quality grade
of wheel bearing grease. See page 11.
LUBRICATION -
FIGURE 2.
FREQUENCY ITEM PROCEDURE
Daily Wheel Hub Lug Bolts Check for proper torque as listed on page 12.
Wheel Hub Bearings Check bearing play and adjust bearing preload if required.
Tire Inflation Check inflation as listed on page 13.
Every 30 Days All Fasteners And
Connections
Check complete trailer for loose and fatigued fasteners. Check
all pivots for play. Tighten or replace as required.
Annually Tires Check tires for wear and replace when necessary.
All Pivots And Bushings Check for wear and repair as required.
INSPECTION