Transporting 8, Use safety chain 8, Transporting – Meyer XT1600L User Manual

Page 8: Use safety chain

Advertising
background image

TRANSPORTING

DO NOT OPERATE WHILE

UNDER THE INFLUENCE OF ALCOHOL OR

DRUGS.

Be certain your forage box is properly mounted to the

trailer. Consult your dealer if you have any questions

about the tie down kit from the manufacturer.

INSPECT REGULARLY THAT

ALL CONNECTIONS AND BOLTS ARE TIGHT

AND SECURE BEFORE OPERATING. FAILURE

TO HEED MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH.

DO NOT TOW AT SPEEDS

GREATER THAN 20 MPH. FAILURE TO HEED

MAY RESULT IN SERIOUS PERSONAL INJURY

OR DEATH.

Operating speed is dictated by the terrain over which

you are traveling.

Always use caution.

Avoid

traveling on slopes or hills that are unsafe.

Always disconnect the PTO drive shaft from the

tractor and return it to its storage bracket on the

unloading unit for transporting. Failure to do this may

result in equipment damage.

OBSERVE ALL APPLICABLE

TRAFFIC LAWS WHEN TRANSPORTING ON

PUBLIC ROADWAYS. CHECK LOCAL LAWS

FOR ALL HIGHWAY LIGHTING AND MARKING

REQUIREMENTS.

INSTALL A SMV EMBLEM ON

REAR OF FORAGE BOX FOR TRANSPORTING

ON ROADWAYS AND KEEP THIS EMBLEM

CLEAN AND BRIGHT. FAILURE TO HEED MAY

RESULT IN SERIOUS PERSONAL INJURY OR

DEATH.

If you will travel on public roads and it is legal to do so,

you must know all rules governing such operation.

This will include lighting and brake requirements in

addition to traffic rules. You may also be required to

install a safety chain device on the running gear.

Check for traffic constantly. Be sure that no one is

attempting to pass and that all traffic is sufficiently

clear before making any turns.

ALWAYS USE A SAFETY

HITCH PIN WITH A LOCKING DEVICE.

USE SAFETY CHAIN

A SAFETY CHAIN MUST BE

INSTALLED TO RETAIN THE CONNECTION

BETWEEN TRACTOR (OR OTHER TOWING

VEHICLE) AND SPREADER WHENEVER

TRAVELING ON PUBLIC ROADS IN CASE THE

HITCH CONNECTION WOULD SEPARATE. A

SUGGESTED ATTACHMENT IS ILLUSTRATED

ON FIGURE 1.

The chain must be strong enough to hold the weight of

the loaded trailer. If using a grab hook at the end(s) of

the chain to secure the chain to itself, a hook latch

must be installed.

The length of the safety chain is not to be any longer

than necessary to turn without interference. If any

chain links or attachment hardware are broken or

stretched, repair before using. Store chain so it does

not corrode or become damaged. Do not use this

chain for other implements because the strength and

length of chain may not be adequate. Identify this

chain for use on this particular trailer.

ALWAYS TRAVEL UPHILL OR

DOWNHILL ON INCLINES AND SLOPES TO

PREVENT ROLLOVER

Tandem Trailer

Page 8

Figure 1. Safety Chain Installation

TOWING MACHINE

ATTACHING POINT

INTERMEDIATE

SUPPORT

ROUTE CHAIN THRU

LOOP UNDER TONGUE

(Use hook latch)

HOOK W/HOOK LATCH

Advertising
This manual is related to the following products: