On-screen status displays 27 – Philips Magnavox VRZ362AT User Manual

Page 27

Advertising
background image

SELECT op CHOOSE B

STATUS

[ON]

COUNTER ONLY

[OFF]

TO END PUSH EXIT

On-Screen Status Displays 27

• If the channel you select has no

broadcast, the screen will become
solid blue.

• You may not access a status display

when viewing a still picture, during
slow motion playback, or when the
F.FWD/
B or REW(ind)/s button is
pressed during playback.

Helpful Hints

1

Press the VCR button, then press the MENU button.

Button
Pressed

Time

MTS
Broadcast
Available

Counter
and
Counter
Memory

Tape
Speed

STOP 12:00 AM
TV STEREO CH10

STEREO

2ND AUD

SLP

M 1:23:45

HIFI

A status display will appear when you press the STATUS/EXIT
button or certain function buttons. The contents of the status dis-
play will vary. To choose the status display mode, follow the steps
below.
If you select STATUS ON, then select COUNTER ONLY
ON:

Whenever you press the STOP/p button or the PLAY/o but-
ton, the status display will appear for five seconds. After five
seconds, only the counter will remain on-screen. You must
press the STATUS/EXIT button to remove it.

If you select STATUS ON, then select COUNTER ONLY

OFF:

Whenever you press the STOP/p button or the PLAY/o but-
ton, the status display will appear for five seconds.

If you select STATUS OFF:

The status display will not appear when you press function but-
tons. You must press the STATUS/EXIT button to see the sta-
tus display.

2

Press the PLAY/o button or the STOP/p button to select
VCR SET UP, then press the F.FWD/
B button.

3

Press the PLAY/o button or the STOP/p button to select
ON SCREEN MODE, then press the F.FWD/
B button.

5

If you set STATUS to OFF, go to step 6. If you set STA-
TUS to ON, press the PLAY/
o button or the STOP/p
button to select COUNTER ONLY, then press the
F.FWD/
B button so that OFF (or ON) appears beside it.

6

Press the STATUS/EXIT button.

4

Press the PLAY/o button or the STOP/p button to select
STATUS, then press the F.FWD/
B button so that OFF
(or ON) appears beside STATUS.

Status Display

(example only)

Receiving and
Recording Mode

Channel

Audio
Out
Mode

VRZ362comb.QX33 4/7/99 8:26 PM Page 27

Advertising