Metra Electronics CADILLAC 95-2004 - Manual (Page 5)

3
95-2004
KIT ASSEMBLY
DOUBLE DIN / STACKED ISO DIN
HEAD UNIT PROVISIONS
Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from
Metra or AXXESS. Re-connect the
negative battery terminal and test
the unit for proper operation. 1
Attach the Double DIN brackets to
the inside edge of the Double DIN
trim plate. (Figure A) 2
Slide the bracket/radio housing
assembly over the Double DIN head
unit and secure using the screws
supplied with the radio. (Figure B) 3
4 Reassemble dash in reverse order of
disassembly.