Maverick Ventures ET-68 - Manual

After a few seconds the unit will stop computing and will LOCK onto a temperature. It will
then display LOCKED temperature and fill in the appropriate pie piece icon sasper
examples below. If the temperature varies by by 3˚F up or down then the unit will display
the new temperature.
Donenesstable:
WELL POULTRY indicator
WELL BEEF indicator
MEDIUM indicator
MEDIUM RARE indicator
RARE indicator
RAW indicator > or = 170.0
160 ~ 169.9
140 ~ 159.9
130 ~ 139.9
120 ~ 129.9
< or = 119.9 > or = 76.7
71.1 ~ 76.6
60.0 ~ 71.0
54.4 ~ 59.9
48.9 ~ 54.3
< or = 48.8
DONENESS LEVEL TYPE TEMPERATURE(˚F) TEMPERATURE(˚C)
UNIQUE FEATURES
The U.S.D.A.recommends the minimum internal temperature for ham and
freshground beef, veal, lamb, pork reach 160˚F to destroy harmful bacteria like
Salmonella and E. Coli. Beef, veal, lamb fresh pork (roasts, steaks, chops) and poul
try must reach minimum internal temperature of 170˚F.
FEATURES
1.When timer is running, no predefined temperature can be used; when predefined
temperature is in use, no timer function can be used.
2.Auto-on:When the measured temperature reaches 113˚F(45˚C), the unit switches
on automatically and enter sin to the Temp. mode.
Auto-off:No button pressed for 5 minutes, provided that the measured
temperature is below 113˚F(45˚C)in temp. mode. No auto-off when timer is running
3.The default temperature set in the SET mode is 120˚F(48.9˚C). The temperature
set is kept in memory even when the unit is off.
4.Below-range indication:“---.-”is shown on the temperature display when the
temperature is lower than 32˚F(0˚C).
5.The fork tip sare detachable from the handle and are dishwasher safe.
6.Above-range indication: When the temperature is higher than 212˚F(100˚C),
“---.-” and “OVER” flash together with sequential quick beep sounds(B..B..B..B..)
generated.
INTRODUCTION
Your RAPID-READ THERMOMETER FORK with TIMER is the newest and most
innovative electronic food thermometer that quickly & accurately indicates the
doneness of cooked meats, fish and poultry during the cooking process. The device
instantly measures the temperature of the food through its copper sensory tip and
electronically sends this reading to the LCD display.
BUTTONS
ON/AUTO button
SET button
NOTE
- Every button press produces 1 beep sound to indicate the recognition by the unit.
USINGTHE RAPID-READ THERMOMETER FORK with TIMER With the unit in
the temperature mode grasp the Thermometer Fork firmly with one hand and
insert the tips (only the right copper tip has sensor in it) into the center of the
thickest portion of the food (try to avoid touching bone or heavy fat areas). Hold
in position for a few seconds and watch the LCD display as the unit computes the
temperature. The temperature display goes to all dashes “---.-” and the icons :
"RAW", "RARE", "M.RARE", "MED", "beef WELL" and "poultry WELL" will be turn
ON consecutively.
START/STOP button
- In Temp.mode,the button has no function
- InTimer mode, press the button to start the timer. The icon “Timer” &“ : ” will flash.
Press the button again to stop the timer. The icon “Timer” & “:” stop flashing.
- When the timer is set to count-up. The format of MIN: SEC will switch to HR:
MIN if the timer counts longer than 1 hour. Max range is 24 hrs {24:00}.
- When the timer is set to countdown. The format of HR: MIN will switch to Min :
SEC if the timer counts shorter than 1 hour. Max range is 24hrs {24:00}.
CLEAR/(˚F or˚C)button
- In Temp mode, pressthebuttontotogglethe unit between Degree Fahrenheit and
Celsius.
- InTimer mode, press the button to re set the preset timer.
- When the timer is running,the button cannot be used.
- When unit is off,press once to switch on the unit with all the LCD segments turned
on for 1 second and 1 beep sound generated, and enter into Temp.mode.
- When unit is in normal operation,press the button,it will toggle between
Temp.mode and Timer mode.Default mode is Temp.mode.In Timer mode, the
icon “Timer” will display.
- The measured temperature is display edon the LCD. When the temperature
reaches the pre defined figures, the corresponding doneness indicators will be
displayed.
-In Temp mode,press the button to set the desired temperatures. The icon “SET” is
shown. The temperature reading to be set starts to flash for 3 seconds. Before the
flashing ceases, press the button again to increase the reading by 1 for each
separate button pressed; or press and hold to increase the temperature rapidly.
When the reading exceeds the upper limit of the operating temperature, it starts
again from the lower limit in a cyclic fashion (48.9˚C 100˚C or 120˚F 212˚F).
The temperature measured by the unit will then be displayed after the flashing.
-When the detected temperature is equal to or higher than the set temperature, the
reading of the detected temperature will flash together with sequential beep sounds
(BBBB…BBBB…BBBB...) generated. The visual and audio indications stop when
the condition is no longer valid. The beep sounds only last for a maximum of 10
seconds.
-In Timer mode, press the button to increase the timer by 1minute. The 4 digits will
flash for 3 seconds. Before the flashing ceases, press the button again to increase
the reading by 1 for each separate button pressed ; or press & hold the button to
increase the timer rapidly. Press the MODE button after press & hold the SET
button would increase the reading by 1hour. When the timer exceeds the upper
limit of {24:00}, it starts again from lower limit in cyclic fashion (00:00 24:00).
Default timer is countdown. Press the SET will change to count-up.
-When the timer is running,the button cannot be used.
CLEANING BEFORE / AFTER USE
- The tip is coated with a manufacturing oil so please wipe/wash off before first use.
- Allow the tips to cool for 60 seconds before touching as they may be hot.
- Remove the tips by pressing lock button and pulling them form the handle.
- Place in dishwasher or wipe with a damp, soapy cloth or sponge. Dong use alcohol.
- Dry it. Make sure it is completely dry after cleaning.
- The handle can be wipe with damp cloth or sponge.
- Caution – Do not place handle in dishwasher or immerse in any liquid.
BATTERY REPLACEMENT
The RAPID-READ THERMOMETER FORK with TIMER is powered by two replaceable
1.5 volt AAA super heavy duty batteries with should last for 6 months. To replace
batteries, lift off the battery cover on the rear of the unit and pull out used batteries noting
polarity. Insert two new extra heavy duty AAA batteries.
HELPFUL HINTS
False readings can accidentally be obtained by touching bone or fat pockets within food;
by pushing the tips too far though the food, or not in far enough. Take multiple readings
to be sure.
Thin foods (under ½ inch) are very difficult to measure properly as they tend to cook
through fast. Always insert tips into thickest part of food realizing thin sections with be
cooked faster.
LIMITED NINETY DAY WARRANTY
This THEMOMETER FORK product is warranted by Maverick Industries, Inc. to be
free from defects in materials and workmanship for a period ninety (90) days from date of
initial use, considered to be not more than thirty (30) days after date of purchase. In the
event of any claim under this limited warranty, Maverick Industries, Inc. will repair or
replace at its sole option any unit or part(s) thereof, provided such units or part(s) are
sent freight prepaid to the Customer Service Department, Maverick Industries, Inc.,
THERMOMETER FORK, 94 Mayfield Avenue, Edison NJ 08837. THERMOMETER
FORK comes ready to use with replaceable 1.5 V 2 X AAA extra heavy duty battery.
Typical battery life: 2 years.
www. maverickhousewares.com
32-119˚F(+/-4˚F) 120-212˚F(+/-2˚F)
DIGITAL GRILLING FORK WITH RAPID-READ TIP•ET-68C