Makita EW220R - Manual (Page 23)

ENGLISH
FRANÇAISE
ESPAÑOL
12
L
H
Speed control lever
Speed control lever
Speed control lever
L
H
Speed control lever
2. RUNNING
(a) After the engine starts, set the
speed control lever at the low speed
position (L) and warm it up without
load for a few minutes.
(b) Gradually move the speed control
lever toward the high speed position
(H) and set it at the required engine
speed.
Whenever high speed operation is
not required, slow the engine down
(idle) by moving the speed control
lever to save fuel and extend engine
life.