McIntosh MDLP2 User Manual
Page 31
31
Packing Instructions
In the event it is necessary to repack the equipment for
shipment, the equipment must be packed exactly as shown
on this page, with the protective cover installed on the
projector lens. Failure to do this will result in shipping
damage.
Use the original shipping carton and interior parts only
if they are all in good serviceable condition. If a shipping
carton or any of the interior part(s) are needed, please call
or write the Customer Service Department of McIntosh
Laboratory. Refer to page 4. Please see the Part List for the
correct part numbers.
CAUTION: To prevent possible damage to the Projec-
tor Lens Assembly, DO NOT at any time
attempt to LIFT, CARRY or RE-ORI-
ENT the Projector using the Lens.
Quantity Part Number Description
1
034374
Shipping carton complete
Packing Instructions
Protective
Lens Cover
Shipping
Carton
Top
Shipping
Carton
Bottom
Foam
Pad
Top
Foam
Pad
Bottom