Maxtor 4 CH Digital Video Recorder - Manual (Page 24)

23
APPENDIX #5 – NETWORK APPLICATION
Video Web Server Features
• Compatible with most of CCTV Products; empower any video output device watching and
controlling on the Internet or LAN
& Auto Network Reconnection (ANR)
& Upgrade firmware & AP from FTP site via Video Web Server
& Watch dog function supported
& Support Dynamic IP address
& 4 alarm inputs supported
& Duplex function, record and playback simultaneously at client site
& Auto e-mail warning system which will remind you if external alarm
happened
& Intelligent non-stoppable recording function after ANR
& Multi AP screens supported
& Unique video player
1 ) Connect the Sub-D plug of Video Web
Server with our own brand DVR products.
2 ) Set the “Remote” function in the DVR
products.
NOTE : Remote mode : RS-485,
Baud rate : 2400, ID : same
as “I/O port setting” in the Video
Web Server.
3 ) Set the “I/O Port Setting” in the system
config of Video Web Server.
Port1 : DMR-4, Device ID : 20.
DVR Control
Video Web Server
RS232-TX
GND
RS232-RX
RS485-B
VIDEO LOSS
RS485-A
SWITCH OUT
DISK FULL
ERROR OUT
ALARM RESET
REC START
ALARM INPUT
EXTERMAL ALARM NC
EXTERNAL ALARM COM
EXTERNAL ALARM NO
1
9
8
15
1CH/4CH DVR Video Web Server
GND
ALARM1
INPUT
ALARM 3
INPUT ALARM4
INPUT
RS485-A
RS485-B
NORMAL
HIGH
ALARM2
INPUT NORMAL
LOW
⑤ ④ ③ ② ①
⑨ ⑧ ⑦ ⑥
1/4 CH DVR
(MENU)
TIMER
CAMERA
RECORD
ALARM
DWELL
u REMOTE
SYSTEM
EVENT
(REMOTE)
REMOTE MODE : RS- 485
BAUD RATE : 2400
ID : 020 u