Mace DVR0414 - Manual (Page 29)

29
6.3 Control of Pan-Tilt and Zoom Cameras
*The PTZ Camera # must be selected on DVR before you can control the camera from
the DVR or remotely.
Button-pressing order Instruction ✉✂❺✣⑥✂⑤✂⑤❀❻✂❼ ❻✂❼ ❻✂❼ ❻✂❼✾❽✑❾➀❿✟➁✙⑤➃➂✪✈①✇✑②
1 Refer to menu operation at
6.4.4
In Control setting select the related Channel and Protocol,
see the right picture. Set the Baudrate and Address of the
PTZ Camera. Press Enter to save.
2 Assistant function Fn When in real time monitoring Mode, press Fn to show the
right picture. Move to select PAN COTROL
Or IMAGE SET .
PAN COTROL
Press Enter to show DIRECTIONS
Press Fn continuously to shift among DIRECTIONS ,
LENS CONTROL (ZOOM FOCUS IRIS) , LIGHT
CONTROL (OFF ON). Use arrows to adjust.
IMAGE SET
Press Enter to show VIDEO SET DEFAULT .
DEFAULT is a factory default. SET is to be done by
user. Press
to shift between SET and DEFAULT.
When SET is selected, press Enter to do BRIGHTNESS
setting. Press
to change numbers. Press FN to
shift among BRIGHTNESS, CONTRAST, HUE, and
SATURATION. Press ESC to exit setting.
3 Direction Control the related pan-tilt, lens and light. Use Arrows to
select.
❙ ❚ ❯ ❱ ❲❳❚ ❨❬❩ ❭ ❱ ❱■❪ ❯❳❫
❙ ❴ ❵
❛ ❲❳❚ ❱❳❚ ❙ ❚ ❨ ❡ ❴ ⑧❳❙ ❙ ❢ ❢ ✐
➄ ❝ ❞ ❡ ❲ ❝ ❱ ❭➅❶ ➆ ✐ ✐
❝ ❡ ❡ ❲ ✐ ✐ ✐
❩ ❝ ❥ ❭➅❙ ❝ ❯❳❙ ❭ ❨
➇ ❞ ❯❳❙ ❱■❪ ❚ ❯❳❩
❛ ❝ ❯➈❙ ❚ ❯ ❱ ❲❳❚ ❨
❪ ⑩ ❝ ❫ ❭➈❩ ❭ ❱
OFF ON
LIGHT CONTROL