Minicom Advanced Systems Central Management Appliance KVM.net II - Manual (Page 3)

KVM.NET II
2
KVM.net II Manager’s default network parameters
Each KVM.net II Manager unit comes with the following network default values:
IP address - 192.168.1.250.
Subnet mask - 255.255.255.0
Gateway - 192.168.1.1
If these values are not suitable for your network, follow the steps below to display
the KVM.net II interface and change the
network parameters of the KVM.net II
Manager.
Logging into the KVM.net II web interface
1. Open your Web browser (Internet Explorer version 6.0 or higher).
2. Type in the IP address of the KVM.net II Manager (default IP address
https://192.168.1.250) and press Enter. (Change your computer network settings,
if necessary). The Login page appears.
3. Type the login name admin and password access.
4. Press Enter. The Web interface appears, see Figure 1.
Menu section
IP device type New devices identified
with their MAC address
Once devices are
identified by a
name they appear
here
Figure 1 Devices page