Miele KM5753 - Manual (Page 21)

Booster function
Each burner is equipped with a booster
function to temporarily increase the
power level. The front left burner is
equipped with a double booster.
When the booster function is on, the
burners increase to power level
9 for
10 minutes. This boost is intended
quickly bring large quantities of water
to the boil, e.g. when cooking pasta.
A maximum of two booster functions
can be used at one time.
If the booster is activated, when
– no power setting is selected, the
burner will revert to power level 9 at
the end of the booster time or when
the booster is switched off.
– a power setting is selected, the
burner will revert to this pre-selected
power setting at the end of the
booster time or when the booster is
switched off.
Taking a pan off the burner while the
booster is in operation interrupts the
booster function. It will resume if a pan
is placed back on the burner within 3
minutes.
The booster can be switched off by
touching the + and - sensor at the same
time, or by touching the - sensor.
The extra boost of energy is only
available by taking a proportion of
energy away from another burner. For
this reason, the burners are networked
in pairs as shown.
When the booster is activated:
– if Auto-heat is activated or either
burner of the same network, it will
switch off.
– the power level on the other linked
burner may decrease.
– if the rear left burner is turned on, it
will switch off if booster 2 for the front
left burner is activated.
Use
21