Martin Fireplaces MPL PENINSULA 53D9042 - Manual (Page 8)

7
53D9042. Rev 1 03/03
F
IREPLACE
C
OMPONENTS
MODEL NUMBER DESCRIPTION
MPL Peninsula Style Fireplace
L48 4-foot chimney section (11-inch-diameter flue).
L36 3-foot chimney section (11-inch-diameter flue).
L18 1-1/2 foot chimney section (11-inch-diameter flue).
L12 1-foot chimney section (11-inch-diameter flue).
LE30 One pair of 30-degree elbows. Maximum -- two pairs (4 elbows per chimney).
LSC Chimney support (required when chimney height exceeds 30 feet).
LC Round chimney cap for contemporary installations. Includes storm collar.
LCL Round telescoping chimney cap. For use with flat chase top terminations.
612 0-6/12 pitch flashing for contemporary installation.
1212 6/12 - 12/12 pitch flashing for contemporary installation.
LF-FS-2 17-inch firestop spacer. One required at each ceiling or floor level.
LFSQT Square termination for chase installation. Model TL telescope assembly required but not
included.
TL Telescope assembly for use with LFSQT Square Cap and “L” series chimney.
FP-4-U 4-inch insulated combustion air duct -- 8 foot lengths.
403 4-inch duct connector (for splicing FP-4 ducts). Includes two clamps.
LCLF 3’ x 7’ Flat Chase Flashing. For use with LCL chimney cap.
AK4 4-inches outside combustion assembly.
WH22 End glass door assembly (1 Required).
WH36 Glass door assembly (2 required).