Maxtor Standalone DVR 2007 - Manual (Page 16)

- 4 1 -
4CH STANDALONE DVR
Press button (or [ 5 or Numpad 5 ] Key) to see all 4 channels at the same time.
Press button (or [ 1 or Numpad 1 ] Key) to see channel 1 enlarged.
Press button (or [ 2 or Numpad 2 ] Key) to see channel 2 enlarged.
Press button (or [ 3 or Numpad 3 ] Key) to see channel 3 enlarged
Press button (or [ 4 or Numpad 4 ] Key) to see channel 4 enlarged.
v. Viewer Control Buttons
Use Viewer Control Buttons to control viewer playback.
Fig.6. Viewer Control Buttons
*Press button (or [<-] Key) to start fast reverse playback. By pressing this button again,
you can adjust the speed. The maximum speed is 8 times faster than reverse playback.
*Press button (or [<-] Key) to start reverse playback.
*Press button (or [Space Bar]) to pause playback.
*Press button (or [->] Key) to start normal playback.
*Press button (or [->] Key) to start fast forward playback. By pressing this button several
times, you can adjust the speed. The maximum speed is 8 times faster than normal playback.
Fig.4. DVR Storage Device Information Window
iv. Channel Selection Buttons
According to the record channel setting of the stream, each channel buttons will be enabled.
Select any channel you want to see enlarged.
Fig.5. Channel Selection Buttons
If you want to know how big is the DVR storage device is, or how much stream data is stored
in the device, press this button. Fig.4 shows the DVR storage device information window.
iii. DVR Storage Device Information Button