Medela Classic Breastpump User Manual
Page 10
1
14
4
Set the suction regulator
on the breastpump to
MINIMUM.
1
15
5
Center breastshield(s) over
your nipple(s). Switch on the
Classic Breastpump. Once
pumping begins, you may
adjust the vacuum of the
breastpump to meet your
personal comfort level.
Important Note: If you experience discomfort, contact your
lactation professional as you may need a larger breastshield
or other lactation advice.
To locate a Breastfeeding Specialist in your area,
call 1-800-TELL YOU.
9
9
Connect the angled piece from
the breastpump onto the
barrier/ filter.
1
10
0
Push the ends of the tubing
into the small round openings
in the backs of the breast-
shields. (Location varies by
breastshield used.)
1
11
1
Grasp the yellow ends of the
tubing. Align and push into
each of the openings on the
pump connector.
1
12
2
To double pump:
Turn the pumping ring
to point between the tubing.
The ring will also point to the
double pumping symbol.
1
13
3
To single pump:
Turn the pumping ring to
point at the desired tubing.
The ring will also point to the
single pumping symbol.
17
16