Wiring connections, Antenna relay wire – Metrik Mobile Electronics MCD-479 User Manual

Page 5

Advertising
background image

5

WIRING CONNECTIONS

1. All connections should be soldered and insulated with electrical tape.
2. Be sure to connect the red power input lead to + 12V power terminal after all the

other leads have been properly connected.

3. Run all ground wires to a common ground.
4. After all the connections are completed, press the “RESET” (26) button.

ANTENNA RELAY WIRE

A yellow wire has been provided for power antenna relays. The relay will automatically
activate the antenna when the unit is turned on and retract when unit is turned off.

CAUTION :

Do not hook up the yellow wire directly to the antenna or damage may occur to the unit.

WIRING CONNECTIONS

FOR FOUR SPEAKERS SYSTEM

ANTENNA CONNECTOR

MEMORY
BACK-UP

FRONT Lch
SPEAKER

GREEN

GREEN/BLACK

MAIN UNIT

RCA CABLE

FRONT Rch
SPEAKER

GREY

GREY/BLACK

IGNITION
SWITCH (B+)

POWER
ANTENNA

REAR Lch
SPEAKER

BLUE

BLUE/BLACK

REAR Rch
SPEAKER

WHITE

WHITE/BLACK

RED

BLACK

GROUND (B–)

PINK

CHOKE BOX

YELLOW

(GREY)

+

+

+

+

Rch RED

Lch WHITE

Advertising