Before putting into use, Tips for energy saving – Magic Chef MCWC52B User Manual

Page 3

Advertising
background image

·

·

poor, energy consumption is substantially

·

·

·

Tips, otherwise the energy consumption is
substantially higher.

They describe the appliance and correct operating

·

·

·

·

2

In case the interior accessories are not correctly
placed, rearrange them as described in chapter

Before connecting the appliance to electrical
power supply, leave it to stand for about 2 hours,
which will reduce the possibility of malfunctions
in the cooling system due to transport handling.

"Description of the Appliance"

.

If the gasket is damaged or the door seal is

Before Putting Into Use

the gasket.

higher. To restore efficiency, replace

Always consider instructions stated in
sections Positioning and Energy Saving

Clean the appliance thoroughly, especially in the
interior (See Cleaning and Maintenance).

Instructions for Use

These instructions for use are intended for the user.

procedures for safe use .

SAVE THESE INSTRUCTIONS:

Tips for Energy Saving

Try not to open the door too often, especially when
the weather is hot and humid. Once you open the
door , close it as soon as possible. This is
especially important if you have an upright model .
Every now and then check if the appliance is
sufficiently ventilated ( adequate air circulation
behind the appliance ).
Set the thermostat from higher to lower settings as
soon as possible (depends on how loaded the
appliance is, ambient temperatures etc.).
Ice and frost layers increase energy consumption,
so clean the appliance as soon as the frost layer
is 3-5mm thick.

Advertising