Mace CAM-95 - Manual (Page 2)

■ CAMERA MODULE LAYOUT
■ INSTALLATION
High Resolution Color
Vandal Resistant Dome Camera
(Unit : mm)
AC24V/DC12V
AC IN
DC IN
AC IN
DC IN
1. Dome Base Mounting
- Open the dome cover by unscrewing 3 screws using special wrench
provided.
- Mount the base of camera to a sturdy surface using 4 screws
(1.5 inch) and 4 premade holes on the base of the dome.
2. Power Connect & Monitor Impedance
- AC24V Class 2 power supply.(AC24V/DC12V)
- To avoid fire or shock hazard, must use a UL listed power supply.
- Set the monitor impedance switch to 75
Ω. Check the impedance
switch when the screen turns blurred.
3. Camera Module Adjustment
- Loosen screws for 3-axis camera bracket and adjust the direction and
angle of camera.
- Make sure to retighten the screws for camera bracket.
- Make necessary lens adjustment and DC Level using diagram shown
above.
- Set any function you wish to activate by using the DIP Switches.
4. Dome Cover Mounting
- Replace the dome cover to the base and tighten 3 screws.
■ CABLE CONNECTION
42
42