Operation (continued) – Memorex MKS2112 User Manual
Page 13
12
Press the Skip/Search (
) ❶ or
(
) button ❷ to select the first
track that you wish to program.
When the desired track number
appears in the display, press the
PROGRAM button ❸ again.
3
2
1
4
Press either the Skip/Search (
)
❶
or (
) button ❷ to select the
next track you wish to program.
When the desired track number
appears in the display, press the
PROGRAM button ❸ again.
3
2
1
5
Repeat step 5 until you have
programmed up to 30 track
numbers into the CD Program
Memory.
3
2
1
6
After programming up to 30 tracks in the CD Program Memory, press the
Play/Pause ( ) button ❶ to begin programmed playback. The PROGRAM
indicator will light and playback will begin on the first track that you
programmed. The player will continue to play all of the tracks that you
programmed in the order in which you programmed them. When the last
programmed track has been played, the player will stop and the display will
again show the total number of tracks on the disc. If you press the
PROGRAM button ❷ and then press the Play/Pause ( ) button ❶ again,
playback will start on the first track you programmed and will continue until all
the programmed tracks have been played.
If you attempt to program more than 30 tracks, ‘FU” will appear in the display.
2
1
7
It is also possible to use the
Program and Repeat functions
together to repeat a specific
program indefinitely. First,
program the tracks you wish to
hear in the order you wish to hear
them, as described above. Then,
press the REPEAT button twice.
Both the PROGRAM and
REPEAT indicators will light.
1
Press the Play/Pause ( )
button to begin programmed
repeat playback. The player will
play the tracks you selected in the
order in which you programmed
them. When the last track in the
program has been played, the
entire program will begin again.
2
Programmed Repeat operation
will continue indefinitely until you
press the Stop (■) button or open
the CD door.
3
PROGRAMMED REPEAT
OPERATION (CONTINUED)
To cancel programmed playback, press the
Stop (■) button
while in the Stop mode or open the CD Door.
To check the program, press the PROGRAM button once; “01” (MEMORY 1), then the first selected track will
appear in the display. Press the PROGRAM button again; “02” (MEMORY 2), then the second selected track will
appear in the display. Press the PROGRAM button repeatedly to check the other programmed tracks.
MKS2112.OM.QXD 5/26/03 10:23 AM Page 12