Micro Innovations TravelCam Plus - Manual (Page 6)

Getting Started
Inserting the batteries:
1. On the bottom of the camera, slide the battery compartment door open.
2. Insert the (2) AA-size batteries paying close attention to the proper polarities.
3. Close the battery compartment door.
Important: Use only AA alkaline batteries. The batteries are not rechargeable. Do not try to recharge the batteries. Do not use
manganese batteries. Never mix old and new batteries.
To start recording pictures:
Fig.1
Shutter Button
1. Turn the camera on by pressing the Power Button.
2. The Status Light Indicator will notify you that the camera is ready for use.
3. Using the View Finder Window focus on the object you wish to capture.
4. Press the Shutter Button located on the top of the camera. See Fig.1
5. Always wait for the Status Light Indicator to stop blinking before you proceed.
Note: If you want to take more pictures, first look at the number shown on the LCD panel. This is the number of images shots
remaining. When the number reaches zero (0), you can download the images to you computer and erase the cameras memory
in order to capture more images.
Auto Power Off – The camera features an automatic power off function. To restore power, press the Power button on the back.
Mode / Menu Button Settings
Record Mode – Switch to this mode when recording.
Flash Settings – Use this feature to turn the flash on or off depending on the lighting conditions of your environment.
Self-timer Settings – Use this feature to add a 10 second delay between taking pictures.
Erase Mode – Switch to this mode to erase the current picture or all pictures from the cameras memory.
6