Miele ESW700-25 - Manual (Page 28)

Integrated installations
Models 700-25 FB
760-25 FB
Custom made front panels can be
installed with models 700-25 FB and
760-25 FB.
Panel dimensions
700-25 FB
Width 27
3
/
8
" (695 mm)
Height 11" (279 mm)
760-25 FB
Width 29
13
/
16
" (757mm)
Height 11" (279 mm)
The custom panel must be atleast
3
/
8
"
(10 mm) thick and made of heat resist-
ant material140 °F (60 °C).
a Install a handle to the custom front
panel using counter sunk screws.
b Remove the drawer from the casing.
See "Removing the drawer".
The panel attached to the warming
drawer front can be used as the drilling
template for the custom panel.
c Loosen the two screws on the inner
side of the drawer and remove the
panel from the appliance front.
d Place the panel on a firm surface
with the adhesive tape facing up.
Peel the backing from the adhesive
tape.
e Position the custom panel over the
removed panel using the tape to hold
it in place.
Installation
28