English – MITSUBISHI ELECTRIC LDT46IV User Manual

Page 30

Advertising
background image

English

English-29

TILING

TILING demonstrates multiple screens. This feature provides a single large screen using up to 16 monitors.
It will be able to divide up to 4 each H and V.
This requires you to feed the PC output into each of the monitors through a distributor.
H MONITORS: Select number of horizontal divide.
V MONITORS: Select number of vertical divide.
POSITION: Select a position to expand the screen.
FRAME COMP: Works in tandem with TILING to compensate for the width of the tile bezels in order to accurately
display the image.
ENABLE: Select “YES”, the monitor will expand the selected position.
PIP and STILL will be disabled when “TILING” is activated.

HEAT STATUS

Information of status for COOLING FAN, BRIGHTNESS and TEMPERATURE.
COOLING FAN comes to run when inside temperature is over a guaranteed limit.
In this case warning is displayed on the screen.

POWER ON DELAY

Adjusts the delay time from “standby” to “power on” mode.
“POWER ON DELAY” time is selectable from OFF, 2sec, 4sec, 6sec, 8sec, 10sec, 20sec, 30sec, 40sec and 50sec.

DATE AND TIME

Adjusts the current date and time for internal clock.
You should set this function when you use “SCHEDULE”.

SCHEDULE

Programs the monitor's working schedule.
Schedule the power on and power off with hour and a day of the week. Also sets the input port.
This OSD can't remove except EXIT.
(see “NOTE 2” on page 30 for further information)

HDMI 1 INPUT MODE

Select “PC” when PC or other computer equipment is connected via HDMI.
Select “HD” when DVD player, which has HDMI output, is connected via HDMI.
(When AUDIO is set to HDMI, no sound is provided unless “HD” is selected.)

HDMI 2 INPUT MODE

Select “PC” when PC or other computer equipment is connected via HDMI.
Select “HD” when DVD player, which has HDMI output, is connected via HDMI.
(When AUDIO is set to HDMI, no sound is provided unless “HD” is selected.)

MONITOR ID

ID numbers for remote control are assigned to LDT461V monitors that are multi-connected via RS-232C.
ID numbers 1 to 26 are selectable.

DDC/CI

Use to turn ON or OFF the DDC/CI communication function. Select ON for normal use.

SYNC TYPE

Select “0.3V” for 0.3 Composite Sync.
Select “TTL” for TTL Sync.

ADVANCED OPTION RESET

Selecting ADVANCED OPTION reset allows you to reset all OSD settings from ADVANCED OPTION settings,
except for DATE & TIME.
Select “YES” and press “SET” button to restore the factory preset data.
Press “EXIT” button to cancel and then return the previous menu.

Advertising