Mercedes-Benz 2004 G 500 - Manual (Page 135)

135
Controls in detail
Control system
Setting key-dependency
Use this function to set whether the mem-
ory settings for the seats, the steering
wheel and the exterior mirrors should be
stored separately for each SmartKey
(
୴ page 101).
̈ Move the selection marker with
the
æ or ç button to the
CONVE-
NIENCE submenu.
̈ Press button j or k repeatedly
until you see this message in the dis-
play:
SETTINGS KEY-DEPENDENT .
The selection marker is on the current
setting.
̈ Press æ or ç to set key depen-
dency to ON or OFF .
Setting parking position for exterior rear
view mirror
Use the MIRROR SETTING WHEN PARKING
function to select whether the passen-
ger-side exterior rear view mirror should be
turned downward during parking maneu-
vers when reverse gear is engaged. For
more information, see “Activating exterior
rear view mirror parking position”
(
୴ page 153).
̈ Move the selection marker with
the
æ or ç button to the
CONVE-
NIENCE submenu.
̈ Press button j or k repeatedly
until you see this message in the dis-
play:
MIRROR SETTING WHEN PARKING .
The selection marker is on the current
setting.
̈ Press æ or ç to switch function
ON or OFF .
i
For safety reasons, resetting the SET-
TINGS KEY-DEPENDENT submenu to fac-
tory settings will not reset while
driving.
In the display you will then see the mes-
sage:
CONVENIENCE – CANNOT BE TO-
TALLY RESET TO FACTORY SETTINGS
WHILE DRIVING
.