Specifications – Motorola Canopy Backhaul Module User Manual

Page 52

Advertising
background image

SPECIFICATIONS

Operating Frequency
Range

U-NII: 5.25 to 5.35 GHz and 5.725 to 5.825 GHz

ISM: 5.725 to 5.850 GHz

Access Method

Time Division Multiple Access (TDMA)

Signaling Rate

10 Mbps or 20 Mbps

Modulation Type

High Index 2-level or 4-level Frequency Shift Keying (FSK)
(Optimized for interference rejection)

Carrier to Interference
(C/I)

3dB nominal for 10 Mbps

Receiver Sensitivity

-83 dBm 10

-4

BER for 10 Mbps, -77 dBm 10

-4

BER for 20 Mbps

Operating Range
(All Weather)

Up to 2 miles (3.6 km) with integrated antenna. Up to 35 miles (56 km)
with installed passive reflectors.

Transmitter Power

Meets FCC U-NII/ISM and IC LELAN ERP Limit

DC Power measured at
DC converter

0.34 A @ 24 VDC (8.2 watts) typical
0.38 A @ 24 VDC (9.1 watts) max (long cable runs, high ambient
temperature, high transmit ratio (set by downlink percentage))

Interface

10/100 BaseT, half/full duplex
Rate auto negotiated (802.3 compliant)

Protocols Used by
Canopy

IPV4, UDP, TCP, ICMP, Telnet,
HTTP, FTP, SNMP, DES

Protocols Supported by
Canopy

Switched Layer 2 Transport with support for all common Ethernet
protocols including IPV6, NetBIOS, DHCP, IPX, etc.

Software Upgrade Path

Remotely downloaded into FLASH via RF link

Network Management

HTTP, TELNET, FTP, SNMP

Temperature

-40

°C to +55°C (-40ºF - +131ºF)

Dimensions

11.75” H x 3.4” W x 3.4” D (29.9 cm H x 8.6 cm W x 8.6 cm D)

Weight

1 lb. (.45kg)

Advertising