Mio H610 - Manual (Page 15)

7
1.3 Connecting to AC Power and Charging the
Battery
When charging the battery for the very first time, you should charge it for at least
6 hours.
1. Slide and click the AC converter onto the AC charger.
2. Connect the adapter cable to the bottom of your device.
3. Plug the AC charger into a wall outlet.
4. The charge indicator glows amber when charging is in progress. Do not
disconnect your device from AC power until the battery is fully charged,
when the charge indicator turns green. Charging may take a few hours.
NOTE:
Do not immediately turn on your device after connecting the AC charger to charge a
power-depleted battery. Wait for at least one minute.
Depending on your region of purchase, the AC converter may not look exactly the same
as the picture shown.
Your device can also be charged when it is connected to a desktop computer via the USB
cable. If you intend to charge your device in this way, turn off your device so that it takes
less time to charge the battery.
CAUTION: For optimal performance of the lithium battery:
Do not charge the battery where the temperature is high (e.g. in direct sunlight).
There is no need to fully discharge the battery before charging. You can charge the battery
before it is discharged.
When storing the product for a long period of time, be sure to fully charge the battery at
least once every two weeks. Over discharge of the battery can affect the charging
performance.
Converter