Microsoft POS Keyboard TA61 - Manual (Page 17)

Releasing the Cable Connection
Releasing the Cable Connection
Never remove a cable from a connector socket by simply pulling on the
cable. Always remove the cable by the connector housing. Please follow
the instructions below when removing cables:
■ Turn off all switches to the mains and electrical equipment.
■ Remove all mains cables from the shockproof sockets installed in the
building.
■ Loosen all cables on the electrical equipment.
The mini-DIN connectors are left
plugged in until unlocked.
Using your thumb, pull gently on pla-
stik connector housing
➀ , removing
the connector from the socket. This
unlocks the connector. The metal
part of the connector is now visible.
Now remove the connector from the
socket
➁ .
Self-test
A self-test of the keyboard is performed each time the POS terminal is
switched on. During this test, the interface to the system is disabled. The
system is informed of the successful completion of the test.
➁
➀
Releasing the Cable Connection
GB - 12