Metabo HC 300 - Manual (Page 11)

288 |
MULTI 260 S - D MULTI 260 S - D
COMBO-MACHINES
Special advantages
For single phase alternating current
For three phase current
Comparative device characteristics
As table saw
Table size 1.040 x 400 mm 1.040 x 400 mm
Cutting height 90/45° 90 mm/58 mm 90 mm/58 mm
Saw blade swivel range 0 - 45 ° 0 - 45 °
Maximum cutting width 420 mm 420 mm
Speed 4.600 /min 4.600 /min
Cutting speed 60 m/s 60 m/s
Sliding table 1.080 x 140 mm 1.080 x 140 mm
- Cross-cut guide, length 800 mm 800 mm
- Swivel range, cross-cut guide (right/left) 45 °/45 ° 45 °/45 °
- Cutting width in front of/behind saw blade 720/1.250 mm 720/1.250 mm
As surface planer
Table length 1.040 mm 1.040 mm
Planing width 260 mm 260 mm
Max. chip removal 4 mm 4 mm
Shaft diameter 62 mm 62 mm
Shaft speed 6.300 /min 6.300 /min
As bench thicknesser
Thickness table L x W 590 x 260 mm 590 x 260 mm
Passage height/width 150 mm/260 mm 150 mm/260 mm
Max. chip removal 4 mm 4 mm
Feed rate 7 m/min 7 m/min
As spindle moulder
Spindle speed 4.300/8.500 /min 4.300/8.500 /min
Diameter of spindle 30 mm 30 mm
Spindle height adjustment (maximum) 125 mm 125 mm
Dimensions L x W x H 1.080 x 880 x 850 mm 1.080 x 880 x 850 mm
Rated input power 2,2 kW 2,2 kW
Output power 1,5 kW 1,5 kW
Weight 166 kg 166 kg
Standard equipment HSS planer blade (regrindable), carbide saw
blade Ø 250 mm, trimming slide on ball
bearing, extraction nozzle Ø 100 mm,
wheel set
HSS planer blade (regrindable), carbide saw
blade Ø 250 mm, trimming slide on ball
bearing, extraction nozzle Ø 100 mm,
wheel set
Type MULTI 260 S - W MULTI 260 S - D
Order no. 0290026008 0290026016
COMMON FEATURES
Five-in-one combo-machines: can be used as table
saw, surface planer, bench thicknesser, as bench
milling cutter and for mortising (with accessory)
Easy conversion of various units without special tool
Infinitely variable height adjustment while thickness
planing, steel-corrugated extraction roller
Lockable main switch
Large adjustable fence with pressure appliance made
of sturdy aluminium die cast.
Sturdy sheet steel table-top, grey cast iron thickness
table
Max. tool diameter in the adjustable fence 180 mm,
in the table 150 mm
Trimming slide on ball bearing - ideal for moulding/
routing head boards
Slot boring machine can be attached to the
side (accessory)
With extensive range of accessories for versatile use
Combo-Machine
MULTI 260 S - W Combo-Machine
MULTI 260 S - D
GB GB