Dash disassembly – Metra Electronics AW-512CR User Manual

Page 6

Advertising
background image

4

99-6503

DASH DISASSEMBLY

Disconnect the negative battery
terminal to prevent an accidental
short circuit.

1

Using a small flat blade screw driver,
pry up on center console trim panel.
(Be careful not to scratch the trim
panel) (Figure A)

2

DODGE VIPER 2003-2006

Loosen the shifter lock nut below
center console trim panel (Figure A)
and unscrew the shifter knob.
(Figure B)

3

Unplug electrical connectors and
remove center console trim panel.
(Figure C)

4

Remove (6) Allen screws from
radio/climate control trim panel and
(1) Phillips screw at the bottom of
the panel.

5

Unplug electrical connectors and
remove the panel. (Figure D)

6

Remove (4) screws securing the
radio. Disconnect and remove the
radio.

7

A

B

C

D

Advertising
This manual is related to the following products: