Miele KM427 - Manual (Page 14)

Turning on and off
Operating a variable / extended
burner
If a burner has the symbol
n next to
the control knob, you can switch on an
additional outer or extended heating
circle.
To turn on a burner push down and turn
the control knob:
– clockwise to the desired setting
turn on one heating circle,
– counter-clockwise to the desired
setting to turn on both heating
circles.
If both heating circles are turned on an
indicator light will come on left of the
control knob.
To adjust the setting, turn the knob
without pressing down.
The burner is turned off by turning the
control knob clockwise or
counter-clockwise to "0".
Operating a single burner
A burner without the symbol
n next to
the control knob is turned on by
pushing the control knob down and
turning it clockwise or
counter-clockwise to the desired
setting.
To adjust the setting, turn the knob
without pressing down.
The burner is turned off by turning the
control knob clockwise or
counter-clockwise to "0".
Operating / Residual heat
indicator
When a burner is turned on the
corresponding operating / residual heat
indicator will light up.
Do not touch or lay any heat
sensitive objects on the cooktop
while the operating / residual heat
indicator is still on.
Danger of burns and fire hazard!
Use
14