Musical Fidelity KW 500 - Manual (Page 6)

kW 500 Integrated Amplifier Instructions for use Page 6 of 10 Issue 2: Sept 2004
REMOTE CONTROL
REMOTE CONTROL
The blue buttons on the remote control enable main functions of the amplifier to be operated
from a convenient distance. Remaining buttons on this universal handset are for use with other
Musical Fidelity products, and have no effect on the kW 500 Integrated amplifier.
Equivalent buttons on the remote handset have the same functions as those on the front panel of
the unit.
As the remote control uses an invisible infra-red light beam, the transmitter must be pointed
directly towards the receiver window on the front of the amplifier, without visual obstruction
between them.
Pressing the volume-up or -down buttons on the remote handset will turn the motorised volume
control in the required direction.
The MUTE button mutes the SPEAKER output and PRE-OUT sockets. To show that the
amplifier is muted, the LEDs in the feet will change from their current colour to red. Press the
MUTE button again to cancel mute function, and the feet LEDs will revert to their previous
colour (see page 8, under “Starting”).
If the range of the remote control greatly decreases, replace the batteries with new ones.
Do not mix old and new batteries - two are required, type SUM-4, AAA or LR03. Do not
dispose of used batteries in a fire.
VOLUME (Up)
VOLUME ( Down )
PHONO pickup
input select
CD input select
TAPE input select
MUTE button
SACD input select
TUNER
input select
AUXiliary
input select