Mitel SME Server V5 with ServiceLink - Manual (Page 28)

Chapter 5. Hardware Requirements of the SME Server V5 with ServiceLink Host Computer
• HP J2585A, J2585B, J2970, J2973
• IBM EtherJet PCI 10/100 adapter (i82557)
• Intel 82556, 82557, 82865
• Intel PCI EtherExpress Pro 10+, Pro100+, Pro100B
• Kingston EtherX KNE100TX, KNE110TX, KNE120TX, KNE20T, KNE30T, KNT40T, KNECB4TX
• Lite-ON LNE100TX
• Lucent WaveLan
• Macronix MX98713, MX987x5
• Microdyne/Eagle NE10/100 (i82557 w/DP83840 transceiver)
• NDC Communications NE100TX-E
• Netgear FA310TX 10/100, FA310TXC 10/100, GA620
• Novell NE1000, NE2000, NE2100, NE2500, NE3210, NL-10000
• Olicom OC-2183, OC-2325, OC-2326
• Racal Interlan ES3210
• Realtek 8029
• Samsung Smartether100 SC1100
• Sis 900
• SMC 8432T, 8432BT, EtherPower, EtherPower10/100, EZ 1208T, EZ 1211TX, 83C170QF, LANEPIC
• Surecom EP-320X
• Symbios 83C885, Yellowfin G-NIC
• Syskonnect Gigabit Ethernet
• Thomas Conrad TC5048
• Znyx ZX312 (EtherArray), ZX314, ZX315, ZX342, ZX344, ZX345, ZX346, ZX348, ZX351
If your adapter is not listed above, it may be supported if it is based on one of the following chipsets (check with Red Hat’s web site
mentioned above for confirmation):
• Alteon AceNIC Gigabit Ethernet
• Compex RL2000
• DEC Tulip
• KTI ET32P2
• NetVin NV5000SC
• RealTek RTL8029, RTL8029AS, RTL8129/8139
• VIA Rhine, VT86C926 "Amazon"
28