Mountain Buggy Terrain Double-T2204 - Manual (Page 3)

FRONT WHEEL ASSEMBLY
INSERT AXLE TIGHTEN KNOBS
URBAN SINGLE, DOUBLE & TRIPLE
INSERT AXLE. Also insert spacer
between front wheels.
TERRAIN DOUBLE
INSERT AXLE TIGHTEN KNOBS
TERRAIN & BREEZE SINGLE
1. Holding both knobs at the same time, unscrew
and pull out front axle.
2. Insert front wheel(s). FRONT WHEELS HAVE
NO BRAKE COG.
3. Re-insert axle and fi nger tighten both knobs.
TIGHTEN KNOBS
axle knob
axle
knob knob
axle spacer
knob knob
knob
4
Operation
REAR WHEEL ASSEMBLY
ALL MODELS
Push each wheel on until it clicks
into place. Pull wheels to check
they are secure.
Finished assembly. Push down on
brake lever to apply brakes. Check
brake lever inserts into brake cog on
both sides. DO NOT use stroller if
brakes are not functioning.
3 4
brake
lever
brake
cog
WARNING: TIGHTEN ALL KNOBS AND REGULARLY CHECK THEY REMAIN FIRM.
SWIVELLING FRONT WHEELS
Locking the front wheel swivel(s) is recommended for use
on uneven ground. There is still a small amount of left
and right movement when in the locked position.
URBAN
Check that brake cog is on the
inside next to stroller frame.
2
brake
cog
Slide wheels onto each end of
the axle.
2
brake
cog
axle
TO LOCK: Turn knob so locked
symbol is at the top. Then
swivel wheel under stroller until
it locks into place.
TO UNLOCK: Turn knob
1/4 of a turn so ‘Unlocked’
symbol is at the top.
Knob Knob
1
ERECTING THE STROLLER
Grip stroller near sunhood
joints, and lift.
Place pressure on heel rest
to ensure sliding locks are
fully engaged.
2 1
WARNING: Ensure that all locking
devices are engaged before use.
ALL MODELS