Before first use, Instructions for use, Using the re-heat button – Morphy Richards 2 slice manhattan toaster User Manual

Page 4: Using the cancel button, Using the frozen button

Advertising
background image

4

Before first use

• Before using the toaster for the first time

operate the toaster without bread. Note:
the bread carriage lever

› will not stay

down unless the toaster is plugged in
and the wall switch is on. Ventilate the
room during this period.

• As with all new electric heating elements,

your toaster emits a ‘new’ smell when it
is first switched on. This is quite normal
and not a cause for concern.

Instructions for use

1 Use your toaster without bread, this will

burn off any dust which may have
accumulated during storage. Select the
desired level of browing (1 to 9). This
setting is indicated on the front of the
toaster by the blue LED. When the
browning control is rotated away from
the user the blue LED moves up the
strip. At the very top it is on setting 9
and towards the bottom its on setting 1.
The unit defaults to setting 3 when first
plugged in.

• For best results ensure the bread slices

are of even thickness, freshness and
size. Remember that stale bread toasts
more rapidly than fresh and thin bread
toasts quicker than thick. See additional
points for more information.

2 After selecting the desired level, place

your bread in the slots

‹ and depress

the bread carriage lever

› downwards

until it locks.

3 After the set time has been reached the

bread will pop up automatically ready for
removal from the slots. The bread
carriage lever will have returned to its
upper position and the heating element
will have switched off.

• If the bread in your toaster becomes

jammed disconnect your toaster at the
socket, allow it to cool, then remove the
bread.

• When not in use, switch your toaster off

at the mains and remove the plug from
the socket.
WARNING: Do not wrap the cable

around the main body of the appliance
during or after use.

Using the re-heat button

If your toast has popped up and gone

cold, the toaster offers a re-heat facility. To
use, press the re-heat button

‚, then

depress the bread carriage lever. A red light
on the front panel will illuminate and the
toaster will operate for a short period
re-heating the bread.

Using the cancel button

If you wish to interrupt the toasting

process, press the cancel button

fi. You

can also press any of the function buttons
fi, ‡, ·, ‚ to cancel toasting.

Using the frozen button

To toast frozen bread do not adjust the

browning control from your normal
preferred setting, place the bread normally
in the bread slots, press the frozen button
‡ then depress the bread carriage lever. A
red light on the front panel will illuminate.

44420 Rev 1 23/12/04 3:06 PM Page 4

Advertising