Tri-vista 21, Specifications – Musical Fidelity TRI-VISTA 21 User Manual

Page 6

Advertising
background image

Tri-Vista 21 DAC Instructions for Use Page

6 of 6

Issue 2: Feb 2004

SPECIFICATIONS :

Musical Fidelity reserves the right to make improvements which may result in specification or feature changes without notice.

DAC architecture

24-bit Delta-Sigma (Bitstream)
Dual differential
8 times oversampling, 96 / 192kHz switchable

Sampling frequencies

8 to 108kHz

Data types

16, 20, 24 bit word lengths

Inputs:

RCA 75

, S/PDIF

TOSLINK optical

Outputs

RCA left and right analog audio,
RCA digital loop out

Output impedance

50 Ohms

Frequency response

10Hz to 20kHz ± 0.0dB

Signal/noise ratio

114dB “A”- weighted

Total harmonic distortion

< 0.0025% 10Hz to 20kHz

Total correlated jitter

< 135pS

Channel separation

< 109dB 20Hz to 20kHz

Linearity

< 0.2dB down to -100dB

Audio output at digital 0dB level

2.17 Volts RMS at 1kHz nominal

Power requirements

100

,

115 or 230Volts AC 50 / 60Hz

(Voltage factory pre-set for country)
30 Watts

Dimensions

440mm, 17.3 inches wide
105mm, 4.13 inches high (including feet)
375mm, 14.8 inches deep (including terminals)

Weight

13.15 kg, 29 lbs unit only, unboxed
15.2 kg, 33.5 lbs in shipping carton

Standard accessories

IEC type mains lead

Tri-Vista 21

Multistandard 96-192kHz 24 bit

Digital-to-Analog Convertor

Advertising