Miele T1520 - Manual (Page 11)

To select a program
A program can only be selected
when the machine is turned on.
Set the desired program by turning
the program selector either clock-
wise or counterclockwise.
Press the “Start” button.
The program status will be stored for
30 minutes in the event of a power
failure.
The program is cancelled if
– There is a power failure lasting more
than 30 minutes.
– The program has already reached
the “Cooling down” or “Anti-crease”
stage.
To change a program during
drying
Set the program selector to the
desired program.
The new program will start from the be-
ginning.
The tables on the following pages lists
the range of applications for the differ-
ent programs.
Correct procedure
1 Press the “On/Off” button.
2 Press the “Door” button and load the
drum.
3 Close the door with a firm swing - do
not push it shut.
4 If drying a standard load, press the
"Load size" button.
5 Select a program.
6 Press the “Start” button.
After the program has finished
1 Set the program selector to “Finish”.
2 Remove the laundry.
3 Clean the lint filter.
4 Turn off the machine.
Program selection
11