Motorola M68EZ328ADS - Manual (Page 33)

MOTOROLA M68EZ328ADS v2.0 USER’S MANUAL C-32
APPENDIX C
PROGRAMMING ON-BOARD FLASH MEMORY
C.1 OVERVIEW
The Flash memory on the ADS board cannot be written directly. A special program com-
mand sequence is required to unlock it before starting the write process. A flash program is
therefore provided with the ADS board for helping users to do re-programming. The sections
below will describe the program and provide further information about the process and other
required elements.
It is recommended that user should have a basic understanding of bootstrap mode operation
of MC68EZ328 before reading the material below. For more details on Bootstrap mode,
please refer to the MC68EZ328 user’s manual.
C.2 ELEMENTS FOR PROGRAMMING THE FLASH
The following files are necessary for programming the Flash memory
1. EZTOOLS including BBUG.EXE and STOB.EXE
2. INIT.B - b-record for initializing the ADS
3. ERASE.B - b-record for erasing the flash memory
4. FLASHNML.B - b-record for programming flash. ROM image is copied from RAM area
to the Flash memory area
5. ROM.B - ROM image of user program in b-record/s-record format.
Freescale Semiconductor, I
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com
nc.
..
ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005
ARCHIVED BY FREESCALE SEMICONDUCT
OR,
INC.
2005