Magnadyne MV-DVD-PL5 User Manual

Page 21

Advertising
background image

21

Only qualified service personnel can
remove the cover or service this player.
Otherwise the warranty will become
invalid.

No Power:

• Check to see if the player is set to "On".

• Check to see that the power plug of the

main unit is properly connected.

• Check to see if that power to the outlet

is properly working.

No Picture:

• Check to see that the monitor or TV is

switched to "On".

• Select the correct AV input on the mon-

itor or TV.

• Check the video connection.

Distorted Picture:

• Check the disc for fingerprints and clean

with soft, dry, cloth, wiping from center

to edge.

• A small amount of picture distortion may

appear. This may not be a malfunction.

Completely Distorted Picture:

The disc format is not according to the

TV used (PAL/NTSC).

No Color in Picture:

The disc format is not according to the
TV used (PAL/NTSC).

No Sound:

• Check audio connections.
• If using a Hi-Fi amplifier, try another

sound source.

Disc Does Not Play:

• Ensure the disc label is facing upwards.

• Clean the disc.

• Check to see if the disc is defective by

trying another disc.

No Return to Start-Up Screen when Disc is

Removed:

• Press POWER to turn "Off" the unit, then

press it again to turn "On" the unit.

• Press RESET button "On" the front of the

DVD unit.

The Player Does Not Respond to the

Remote Control:

• Aim the remote control directly at the

sensor on the front of the player.

• Avoid all obstacles which may interfere

with the signal path.

• Inspect or replace the remote control

batteries.

No Audio at Digital Output:

• Check the digital connections.

• Check the Audio Setup menu to make

sure that the digital output setting is

correct.

• Check if the audio format of the selected

audio language matches your receiver’s

capabilities.

Buttons Do Not Work:

• Press POWER to turn "Off" the unit, then

press it again to turn "On" the unit.

• Press RESET button on the front of the

DVD unit.

DVD player showing “REGION ERROR”

• The DVD player and the discs all have a

“REGION CODE”. If the region number

on the disc does not correspond to the

region number of the DVD player the

unit cannot play the disc.

Troubleshooting

MV-DVD-PL5Rev_B.qxp 11/2/04 3:48 PM Page 21

Advertising